| MODEL | ARD1000 | ARD2000L | ARD2000 | ARD3000 |
| Elevator motor | 2.2kW | 5.5kW | 5.5KW | 7.5kW-9KW |
| Display |
| Indicator on Panel | LED / LCD plus LED display |
| AC MODE |
| Input Voltage | 165Vac ~ 275Vac / 150Vac-275Vac(optional) |
| Input Frequency | 45-65 Hz( transfer to battery mode if out of this range) |
| Output voltage | 220Vac± 10％ |
| Efficiency | ≥ 96% (AC Mode) |
| Overload in AC mode | 110% transfer to bypass within 60sec; |
| 120% transfer to bypass within 30sec; |
| Automatic recovery if load capacity is restored to normal. |
| Short Circuit | Protected by Input Fuse |
| INVERTER MODE |
| Output Voltage | 220Vac± 5% |
| Output Frequency | 50HZ/60HZ ± 1% self-detection |
| Output P.F | ≥0.6 |
| Waveform Distortion | Liner Load ≤ 5% |
| Battery Backup Time | ≥ 10min (PC load) |
| Transfer Time | Typical value 5ms, Max: 8ms |
| Efficiency | ≥ 80(INV Mode) |
| Overload in INV mode | 110% Shut down within 60sec; |
| 120% Shut down within 5sec; |
| Short Circuit | ≥20ms System shut down automatically |
| ALARM |
| AC abnormal | Once every 4sec, be silent after 40s |
| Battery low | Once every 0.2sec |
| Overload | Once every 1sec |
| Battery |
| DC voltage | 24V | 24V | 36V | 48V |
| Configuration | 2×12V 9AH | 2×12V 9AH | 3×12V 9AH | 4×12V 9AH |
| Charging current | 1.2A(Max.) |
| Recharge Time | 90% Capacity after 8hours |
| Communication (option) | RS232/USB/SNMP(can be set to turn on/off UPS automatically) |
| OTHERS |
| Output Sockets | Customized upon request |
| IP Level | IP20 |
| Ambient Temperature | 0℃ ～ 40℃ |
| Ambient Humidity | 10％ ～ 90％ (No Condensing) |
| Noise | ≤50dB (1m) |
| Dimension (mm）D*W*H | 144 x 345 x 215 | 144 x 410 x 215 | 190 x 467 x 335.5 |
| Packing Dimension(mm) | 236 x 427 x 316 | 236 x 492 x 316 | 320 x 592 x 462 |
| Net Weight (kg） | 12.2 | 14.2 | 18.5 | 28.1 |
| Gross Weight (kg) | 13.2 | 15.2 | 19.8 | 30.2 |
